OEM Parts & Service for Industrial Bagging, Conveyor and Processing Equipment
Parts and Services for Industrial Bagging, Conveyor, and Processing Equipment
Production equipment that stops working costs money every minute it is down. HS Automation provides parts and service support for the industrial bagging, conveyor, processing, and automation equipment we supply and install — so when something needs attention, you have one point of contact with the knowledge and inventory to deal with it.
We stock genuine OEM replacement parts, employ factory trained technicians, and offer a full range of service options from scheduled preventive maintenance through emergency in-plant repair. Our goal is straightforward: keep your equipment running at specification and minimize unplanned downtime on your production line.
Genuine OEM Parts
Factory Trained Technicians
In-Plant & Depot Service
Preventive Maintenance
How often should industrial bagging equipment be serviced? For bag handling equipment operating on a single shift, service every 500 operating hours — typically quarterly. For multi-shift operations, service every 250–300 hours. Fischbein portable bag closers require needle, looper, and feed dog inspection every 250,000 stitches. Robotic palletizing cells require quarterly inspection of end-of-arm tooling, lubrication of all mechanical joints, and PLC backup. Contact HS Automation to set up a preventive maintenance schedule tailored to your equipment inventory.
Parts We Stock
We maintain inventory of commonly needed replacement parts across our equipment range, with a particular focus on high-wear and high-cycle components that cause production stoppages when they fail. Our parts supply includes:
| Fischbein Bag Closer Parts | Genuine OEM parts for Fischbein portable bag closers and Empress Series sewing heads — needles, loopers, feed dogs, presser feet, knives, springs, throat plates, and more. See our dedicated Fischbein Parts page for the full list. |
| Conveyor Components | Replacement belting, plastic chain, rollers, bearings, tensioners, and drive components for conveyor systems — including corrosion-resistant and sealed variants for demanding environments |
| Bagging Line Components | Wear parts and mechanical components for bag handling equipment including bag kickers, turners, flatteners, and automated bag squaring systems |
| Automation and Control Components | Replacement sensors, drives, contactors, relays, and control panel components for automated systems and PLC-controlled equipment |
| Consumables | Industrial bag sewing thread, sewing needles, lubricating oils, and other consumables used in daily production operations |
Equipment Repair Services
When equipment needs more than a parts replacement, HS Automation provides repair services carried out by factory trained technicians with hands-on knowledge of the equipment they are working on.
We offer two service delivery options depending on your situation and equipment type:
In-Plant Service
A factory trained HS Automation technician comes to your facility to diagnose and repair equipment on-site. In-plant service is the right choice for:
- Equipment that cannot be easily removed and shipped — inline sewing heads, integrated conveyor systems, control panels, and robotic cells
- Situations where the problem diagnosis requires seeing the machine running in context — intermittent faults, line integration issues, or problems that only appear under production conditions
- Operations where production cannot wait for mail-in turnaround time
- Multi-machine issues or line-wide problems that require a technician to assess the full system
Our in-plant technicians bring genuine OEM parts with them, adjusted and tested to confirm the equipment is operating at manufacturer specifications before they leave your facility.
Depot (Mail-In) Repair
For portable and stand-alone equipment, depot repair is an efficient option — you ship the machine to us, we diagnose, repair, and return it operating to OEM specification. Depot repair is well-suited for:
- Portable bag closing machines — Fischbein F Series and comparable portable closers
- Stand-alone sewing heads and sewing systems that can be removed from the line
- Situations where a spare machine can keep the line running while the primary machine is being serviced
- Routine overhauls and refurbishment between production seasons
All depot repairs use quality parts, and equipment is tested and adjusted to manufacturer specifications before it is returned.
Preventive Maintenance Programs
Unplanned breakdowns are more expensive than scheduled maintenance — in parts cost, lost production, and emergency service time. A structured preventive maintenance program keeps equipment running at specification, identifies wear before it causes failure, and extends the service life of the machines in your operation.
HS Automation offers preventive maintenance services on a scheduled basis — monthly, quarterly, or annually depending on your equipment usage and production volume. A general guideline for bag handling equipment is service every 500 operating hours, which typically corresponds to quarterly service on a single-shift operation.
A standard preventive maintenance visit covers:
- Full equipment inspection — wear assessment on all high-cycle components
- Cleaning — removal of product dust, debris, and contamination from critical mechanisms
- Lubrication — correct lubricants applied to all maintenance points at specified intervals
- Adjustment and timing verification — confirms the machine is operating within OEM tolerances
- Worn component replacement — genuine OEM parts installed during the visit where wear is found
- Performance testing — equipment run and verified to be operating at specification before the visit closes
- Maintenance report — documentation of what was found, what was done, and any items flagged for attention
Preventive maintenance programs can be customized to your equipment inventory and production schedule. Contact us to discuss what a program would look like for your operation.
Genuine OEM Parts Supply
We supply genuine OEM replacement parts for the equipment we sell and service. Genuine parts are engineered and tested by the original manufacturer to the correct tolerances and material specifications for each machine. They fit correctly, perform correctly, and last as long as the original components.
The risks of using aftermarket or knock-off parts are well documented in industrial maintenance:
- Incorrect tolerances that affect machine timing, clearances, and adjustment ranges
- Inferior materials that wear faster and shorten service intervals
- Fitment issues that require workarounds, introducing new failure points
- Potential to void OEM warranty coverage on equipment
- Difficult-to-diagnose failures caused by components that are close but not correct
When you order parts from HS Automation, you get the component that belongs in your machine. We do not substitute aftermarket parts when genuine OEM is available.
Equipment Startup and Commissioning
New equipment performs at its best when it is started up correctly — properly installed, adjusted to specification, integrated with your line, and with your operators trained on correct operation and maintenance procedures. HS Automation provides startup and commissioning services for equipment we supply and install.
Startup and commissioning services include:
- Installation supervision and final mechanical inspection
- Initial setup and adjustment to OEM operating specifications
- Integration testing with upstream and downstream equipment on the line
- Control system and automation verification — confirms interlocks, alarms, and sequences operate correctly
- Operator training — correct operation, adjustment procedures, routine maintenance, and basic troubleshooting
- Documentation handover — operating manuals, maintenance schedules, and parts information
Getting startup right reduces early-life failures, shortens the learning curve for your operators, and ensures the equipment is set up to perform as specified from day one.
Operator and Maintenance Training
Equipment runs at its best when the people operating and maintaining it know how it works. HS Automation provides operator and maintenance training for equipment we supply — either as part of a startup service or as a standalone training engagement for existing equipment.
Training covers:
- Correct operation — how to set up, run, and shut down the equipment safely
- Adjustment procedures — how to make the adjustments needed for different products, bag types, and production conditions
- Routine maintenance — daily, weekly, and interval-based maintenance tasks that keep the equipment running reliably
- Troubleshooting — how to identify and respond to common faults before they become major failures
- Parts identification — knowing which components need regular inspection and replacement, and how to identify wear
Training can be delivered at your facility during installation and startup, or scheduled as a standalone session for maintenance and operations teams. In-plant training allows participants to work on your actual equipment in your production environment — which is more effective than classroom-only instruction.
Equipment We Support
HS Automation provides parts and service support for the equipment we supply and install across our product range:
| Conveyor Systems | Bag handling conveyors, product handling conveyors, pallet handling conveyors, and specialty grain and seed conveyors — wear parts, drive components, and in-plant service |
| Fischbein Bag Closers | Genuine OEM parts and factory trained service for Fischbein portable closers and Empress Series sewing heads — F Series, E/ECR, Model 100, 101, 200, 201, and 400 Series & PBC 6000 |
| Bagging Automation | Service the full lineup of TMI automatic bagging & palletizing equipment |
| Robotic Palletizing Systems | Service and spare parts support for robotic palletizing cells and integrated material handling systems |
| Grain and Seed Processing Equipment | Parts and service for seed cleaning, conditioning, and handling equipment including specialty conveyors |
| Control Systems and Automation | PLC and HMI service, control panel components, sensor replacement, and automation system support |
Contact HS Automation for Parts and Service
Whether you need a specific part to get a line running again, want to schedule a preventive maintenance visit, or need a technician on-site to diagnose a problem — contact HS Automation. We have the parts, the training, and the experience to support your equipment.
Contact us today to discuss your parts or service requirements.
Contact Us
Phone
519-245-2310